QL manual bilge pump, horizontal installation
If there is no electrical power on board you can always rely on the little QL manual bilge pump. It pumps 0.9 litre per stroke which equals 90 litres per minute at 100 strokes per minute. It can be installed behind a bulkhead or below deck to take up the least possible room. The pump handle is removable, only being fitted to work the pump, which saves more space.The QL manual bilge pump comes in two versions to suit different installations: For installation through the deck, i.e. vertical installation, or for installation behind a bulkhead - i.e. horizontal.
Pump housing: PP Polymer
Pump handle: Anodised aluminium
Shaft: Acid-resistant stainless steel
Width: 253 mm
Height: 133 mm
Length of handle: 285 mm
Hose sizes: 1 1/2" or 1"
Max capacity: 90 L at 100 strokes per minute
Please be careful when ordering this product, it has limitations that differ from our General 30-day Return Policy. After all, we want you to be satisfied with your order so you'll return again and again as an iboats.com customer, and to also recommend us to your boating friends
- Volvo Penta Store
An item(s) may be returned within the first 30 days after the item(s) is shipped to you. Merchandise must be in new, unused condition with all original packaging in good condition; plus parts, accessories, manuals, and/or warranty cards included. You will need to receive a return authorization number (RA #) as well as instructions from our Customer Service Department.
Warranty: Volvo Penta parts carry a (1) year manufacturers warranty. Should the part you received fail after install, take a copy of the receipt to an authorized Volvo Penta dealer for a warranty evaluation. If determined that the part failed due to a defect the Volvo dealer will supply a replacement part to the consumer. If needed the Volvo dealer could assist in installation of the new part at his normal labor rate. If you need assistance finding the closest dealer number please contact our Customer Service Department.